|
|
 |
|
|
| |
| SureNet/Support/System Setup/Dialup Instructions - Mac OS/X |
- Click on the Apple menu, and open System Preferences. You can also access System Preferences through the docking bar.
- Click on the Network Icon. In the Location pull-down menu, select Automatic. In the Show pull-down menu, select Internal Modem.
- On the TCP/IP tab, in the Configure pull-down menu, select Using PPP
- Click on the PPP tab. In the Service Provider box, type SureNet. In the Account Name box, type your SureNet username. Your SureNet username is the first part of your e-mail address (username@surenet.net).
- In the password space, type your current SureNet password. You may choose to click "Save Password" underneath the space. Finally, refer to our Access Numbers page for the appropriate dialup number.
- Click on the Modem tab. Select your modem from the pull-down list. Both settings (enable error correction and compression in modem and wait for dial tone before dialing should be unchecked.) Click Apply Now at the bottom of the Network menu and then close the Network window.
- Click on the phone icon at the top of the Finder bar. It should be at the upper right hand corner next to the time stamp. Once you open this, click connect, and your computer will start dialing in.
|
|
|
|
|
 |
|
